PLEASE READ:
ALWAYS consult with Sanatoga Water Conditioning before self-service for proper procedures.
Chlorination Of UV With A Pre-Filter
- Fill a bucket with water for rinsing.
- Turn off valves before and after filter.
- Release pressure from filter by pushing down on pressure relief button on top of filter housing.
- Unscrew filter housing.
- Remove old filter and rinse out housing.
- Be careful not to lose black o ring.
- Be sure “O” ring and part of filter top where o ring seals is clean.
- Fill housing about ½ full of standard household bleach.
- Screw housing to filter top.
- Open in and out valves.
- Run each cold-water faucet in house, (one at a time), until you smell the bleach, then turn it off.
- Run hot water until you feel bleach has been pulled into the water heater.
- Close in and out valves.
- Repeat steps 3-7.
- Put new filter in housing.
- Tighten housing.
- Open valves.
EMERGENCY?
We offer 24 hour emergency service. Call (484) 524-5802 for the technician on call.
If you would like to bypass your equipment, please read below for step-by-step instructions. If successful, you’ll be able to schedule your service appointment in the normal schedule and save money.
Newer water softeners and acid neutralizers have the bypass built into the back of the control valve.
Below you will find instructions on how to operate your water valves in the event of an emergency.
Your Neighbors Love Their Cleaner, Safer, Better Water!
Our dedication to our customers is continually rewarded with referrals and testimonials about our water quality solutions!